5 things to consider when buying a new Copeland Scroll Compressor

As an HVAC contractor, we get to see a lot of new Copeland compressor show up in our shop. And while we love seeing them, the reality is that most of them are not that exciting.

They’re just another piece of equipment at the end of the day—and as soon as you’ve got one installed, it’s no longer in your shop anymore. But when it comes to purchasing a new Copeland compressor for your system, there are some factors that may make all the difference.

Here are five things to consider before buying one:

1. What type of system will it work with?

Before you buy, it’s important to determine what type of system your new Copeland compressor will work with. This can be determined by looking at the label on the compressor itself or asking its manufacturer if they have a list of compatible systems.

The compressor must also be compatible with refrigerant that is used in your application. For example, if you plan on using R134A or R134B refrigerant in your system then make sure that your new scroll compressor has been designed specifically for those types of gases.

2. How many tons of cooling capacity do you need?

The first step in choosing a Copeland scroll compressor is calculating how much cooling capacity it needs. The best way to do this is by multiplying the horsepower of your Copeland Scroll compressor by 20% and then adding that number to 100%. So, for example, if you have an engine with 200 horsepower and it will be running 0continuously at 65% of its maximum output (which would be 163 hp), then multiply 200 x .20 = 40. Then add 40 + 100 = 140 total tons per hour for your calculations.

The next step is figuring out what kind of machine can handle this amount of power—and there are several different options available depending on what type of system or job site conditions apply:

Air cooled condensers are used where temperatures are low enough that neither water nor oil lubrication is necessary; they’re also ideal when using dryer lube oils like those found in high-performance spark plugs because they won’t get stuck “gumming up” over time.

Oil cooled condensers like Copeland Scroll compressors require more maintenance but offer better resistance against dirt buildup which makes them ideal for industrial applications like construction sites where workers aren’t allowed near any machinery without protective gear.

Electric motors offer higher speed capabilities than other types but come with their own set drawbacks such as increased noise levels caused by fan blades rubbing against each other while running longer hours at full speed than traditional models

3. How much application flexibility do you need?

When you’re looking at a new copier or Copeland compressor model numbers, there are many things that can be considered. One of them is how much application flexibility do you need?

If your business only needs to print on top-quality paper and then make copies on less expensive paper (or even a single sheet), then it won’t matter whether the compressor has multiple stages or not. However, if there are more than just two different types of media that need to be processed by your machine, then having more than one stage in the compressor will help save time and money on labor costs as well as materials.

If this is something important for you and/or if you have other needs beyond simply scanning documents into an office environment (such as prepping documents for faxing), then choosing between single stage versus multi-stage Copeland compressor model numbers is essential information before making any purchase decisions!

4. What energy efficiency and performance level do you need?

Energy efficiency is a major factor in deciding which compressor to purchase. A compressor’s EER (Energy Efficiency Ratio) basically indicates how much energy it uses compared to its rated power output. If you need a high-powered unit, make sure there are sufficient advancements in technology for your needs.

The most common way to measure EER or Copeland compressor model numbers is by dividing the wattage of a given model by its nameplate horsepower, or NHP—a figure that will help you see how much power this particular unit requires per tonne of refrigeration capacity needed.

5. Where will it be installed?

When deciding on copy Copeland compressor model numbers, it’s important to consider where you’ll be installing it. Will it be indoors or outdoors? Is your climate humid or arid? Is your compressor located in a corrosive environment (such as oil refineries)? These questions can help determine what kind of system would work best for your application.

Your decision will also depend on how much space you have available; if there’s not enough room in your shop or workspace, consider getting an indoor unit instead.

Buying a new compressor is a big decision, but with the help of an expert and the right information, you can feel confident in your purchase.

There are a certain number of things which you should consider such as:

What is my budget?

It’s important to know how much money you want to spend on your compressor before going out and buying one. If it isn’t in this price range, then there are cheaper options available that may be more appropriate for your needs.

How much space do I have for storage?

A larger compressor might require more space than one that takes up less space because it takes up more volume within its enclosure (such as when compared with an upright).

This means that if space isn’t an issue then perhaps buying something smaller will work better for them; however if having lots of room available would mean higher efficiency then maybe consider looking into other options instead like those which come with features such as built-in humidity controls or digital displays which can make monitoring easier than ever before!

Conclusion

Copeland Scroll Compressors are a great option for any industry that needs to keep their coolers and compressors running at peak efficiency. We hope this article has helped you understand how they work, what type of system will work best with your application, and what other options are out there for you. If you have any questions about our Copeland Scroll Compressor or any other product, please feel free to contact us!

You can replace the compressor, or you can rebuild it. Rebuilding involves disassembling the unit and checking each component part for damage and corrosion before putting them back together again.

If your ac system has been through several years of service without any issues, then chances are good that there’s nothing wrong with it at all—just wear and tear from normal use over time!

Leave a Reply

Your email address will not be published. Required fields are marked *